Last reviewed: 13 November 2026

A printing shop may handle water-based inks in one area and flammable wash-up solvent in the next. Both can damage floors and equipment, but the second can also create hazardous vapour and ignition risks. A good spill-control arrangement begins with understanding each printing process rather than placing identical absorbent bins everywhere.

Prevent releases during routine work

Check the transfer of ink from stores to presses, mixing stations, wash-up areas and waste containers. Close lids between uses and inspect pump lines, trays and dispensing taps. Keep liquid-handling areas free from paper waste and other combustibles. Where practical, contain routine drips at their source with correctly chosen drip trays.

Substitution, enclosure and ventilation may reduce exposure much more effectively than clean-up supplies. The HSE COSHH advice for printers discusses exposure to inks, solvents and associated health risks.

Consider fire before absorption

Solvent vapours may ignite from electrical equipment, hot surfaces or static discharge. Check the risk assessment, HSE DSEAR guidance duties and HSE printing fire and explosion guidance before specifying absorbent materials or cleaning techniques. Stop work and activate the emergency procedure for a sizeable flammable release or significant vapour.

For a small, assessed ink leak, trained staff may use compatible absorbents or chemical absorbents. Choose materials on the basis of the safety data sheet and actual substance. Do not use a pressure washer or ordinary floor cleaner to drive ink or solvent towards a drain.

Keep waste under control

  • Segregate solvent-soaked materials from ordinary rubbish.
  • Provide closed, appropriately specified waste containers.
  • Inspect waste-ink tanks and bunds regularly.
  • Keep pedestrian and vehicle routes clear during a clean-up.
  • Report repeated leaks and repair faulty transfer systems.

A well-run pressroom treats spill response as the final safeguard after careful substance selection, safe storage and properly maintained printing equipment.