Last reviewed: 13 November 2026
A dropped bottle in a laboratory can involve anything from harmless buffer solution to a flammable solvent, concentrated corrosive or biological material. The correct first response depends on the substance, amount, location and people who may have been exposed. A labelled spill kit is helpful only when it forms part of a properly assessed laboratory procedure.
Identify the hazard before touching the spill
Stop the activity, warn others and prevent access. If the substance is unknown, volatile, highly toxic or reactive, or if there is a significant exposure or fire risk, evacuate or isolate the area as required and call the laboratory’s trained responders. Check the safety data sheet and local procedures; do not approach simply to investigate a smell.
Biological spills need the laboratory’s biosafety arrangements and appropriate decontamination. A chemical absorbent does not sterilise a surface, and a neutralising product must never be used without a substance-specific assessment.
Choose containment that fits the chemicals
For suitable, assessed minor spills, chemical absorbents may help contain liquids until trained personnel collect them. Pads, pillows and socks have different uses, but their chemical resistance and absorption capacity must be checked. Flammable solvents also require attention to ventilation, ignition sources and equipment suitability.
Keep potential releases away from sinks and drains where the site plan requires containment. Small vessels and reagent transfer points may benefit from compatible drip trays; bulk storage needs an appropriately designed containment arrangement.
Keep the response auditable
Store spill materials where trained users can reach them without entering the hazard zone. Include a clear list of exclusions, such as unknown chemicals or high-hazard biological material, rather than merely listing what comes in a kit.
After a safe clean-up, label collected waste according to its contents, arrange the appropriate collection route, check that equipment has been restocked and record any exposure or damage. The laboratory manager should use incident records to improve handling, storage and training.
Practical next steps
Review chemical inventories and local risk assessments when specifying spill kits. A compact kit close to the bench can be useful; it cannot replace a competent decision about whether a spill is safe to tackle.