A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
An effective, aqueous, alkaline degreaser, designed for use Offshore.
Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.
Aqueous
Alkaline
Non-flammable
OCNS Gold Standard - with no product warnings
Benefits
Alkaline formulation for effective degreasing properties
Biodegradable surfactants help lift and remove oil and grease contamination
Aqueous
Non-flammable
OCNS Gold Standard - with no product warnings
Where to Use
An effective, aqueous, alkaline degreaser, designed for use Offshore
Ideal for degreasing pipework
Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)
How to Use
For heavy duty degreasing:
Use as supplied
For general purpose cleaning:
Use at a dilution of 1 part Sobo GR to 19 parts water
The use of warm water is recommended, ideally at approximately 60°C
Dilutions with fresh water can be stored for use later
Dilutions with sea water should be used immediately
Note:
Can be used with care on aluminium, zinc and magnesium alloys.
Always test on a non-safety critical area first to ensure compatibility.
An effective, aqueous, alkaline degreaser, designed for use Offshore.
Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.
Aqueous
Alkaline
Non-flammable
OCNS Gold Standard - with no product warnings
Benefits
Alkaline formulation for effective degreasing properties
Biodegradable surfactants help lift and remove oil and grease contamination
Aqueous
Non-flammable
OCNS Gold Standard - with no product warnings
Where to Use
An effective, aqueous, alkaline degreaser, designed for use Offshore
Ideal for degreasing pipework
Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)
How to Use
For heavy duty degreasing:
Use as supplied
For general purpose cleaning:
Use at a dilution of 1 part Sobo GR to 19 parts water
The use of warm water is recommended, ideally at approximately 60°C
Dilutions with fresh water can be stored for use later
Dilutions with sea water should be used immediately
Note:
Can be used with care on aluminium, zinc and magnesium alloys.
Always test on a non-safety critical area first to ensure compatibility.
An effective, aqueous, alkaline degreaser, designed for use Offshore.
Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.
Aqueous
Alkaline
Non-flammable
OCNS Gold Standard - with no product warnings
Benefits
Alkaline formulation for effective degreasing properties
Biodegradable surfactants help lift and remove oil and grease contamination
Aqueous
Non-flammable
OCNS Gold Standard - with no product warnings
Where to Use
An effective, aqueous, alkaline degreaser, designed for use Offshore
Ideal for degreasing pipework
Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)
How to Use
For heavy duty degreasing:
Use as supplied
For general purpose cleaning:
Use at a dilution of 1 part Sobo GR to 19 parts water
The use of warm water is recommended, ideally at approximately 60°C
Dilutions with fresh water can be stored for use later
Dilutions with sea water should be used immediately
Note:
Can be used with care on aluminium, zinc and magnesium alloys.
Always test on a non-safety critical area first to ensure compatibility.
An effective, aqueous, alkaline degreaser, designed for use Offshore.
Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.
Aqueous
Alkaline
Non-flammable
OCNS Gold Standard - with no product warnings
Benefits
Alkaline formulation for effective degreasing properties
Biodegradable surfactants help lift and remove oil and grease contamination
Aqueous
Non-flammable
OCNS Gold Standard - with no product warnings
Where to Use
An effective, aqueous, alkaline degreaser, designed for use Offshore
Ideal for degreasing pipework
Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)
How to Use
For heavy duty degreasing:
Use as supplied
For general purpose cleaning:
Use at a dilution of 1 part Sobo GR to 19 parts water
The use of warm water is recommended, ideally at approximately 60°C
Dilutions with fresh water can be stored for use later
Dilutions with sea water should be used immediately
Note:
Can be used with care on aluminium, zinc and magnesium alloys.
Always test on a non-safety critical area first to ensure compatibility.
An effective, aqueous, Phosphoric acid based carbonate scale remover.
Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Aqueous
Non-flammable
OCNS Gold Standard - without product warnings
Chlorine free
Inhibited
Less fumes than traditional descalers
Benefits
Phosphoric acid based formulation effectively cuts through carbonate scale
Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
Aqueous
Chlorine free
Inhibited
Non-flammable
Less fumes than traditional descalers
OCNS Gold Standard - with no product warnings
Where to Use
Designed for use in removing carbonate scale build up on mild steel
Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Additional Applications
Sobo Scale is an effective and versatile cleaner, suitable for use in:
Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
Rust removal
Removing scale from toilets
Cleaning oil from concrete
Removing concrete and plaster splashes on hard surfaces
An effective, aqueous, Phosphoric acid based carbonate scale remover.
Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Aqueous
Non-flammable
OCNS Gold Standard - without product warnings
Chlorine free
Inhibited
Less fumes than traditional descalers
Benefits
Phosphoric acid based formulation effectively cuts through carbonate scale
Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
Aqueous
Chlorine free
Inhibited
Non-flammable
Less fumes than traditional descalers
OCNS Gold Standard - with no product warnings
Where to Use
Designed for use in removing carbonate scale build up on mild steel
Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Additional Applications
Sobo Scale is an effective and versatile cleaner, suitable for use in:
Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
Rust removal
Removing scale from toilets
Cleaning oil from concrete
Removing concrete and plaster splashes on hard surfaces
An effective, aqueous, Phosphoric acid based carbonate scale remover.
Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Aqueous
Non-flammable
OCNS Gold Standard - without product warnings
Chlorine free
Inhibited
Less fumes than traditional descalers
Benefits
Phosphoric acid based formulation effectively cuts through carbonate scale
Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
Aqueous
Chlorine free
Inhibited
Non-flammable
Less fumes than traditional descalers
OCNS Gold Standard - with no product warnings
Where to Use
Designed for use in removing carbonate scale build up on mild steel
Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Additional Applications
Sobo Scale is an effective and versatile cleaner, suitable for use in:
Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
Rust removal
Removing scale from toilets
Cleaning oil from concrete
Removing concrete and plaster splashes on hard surfaces
An effective, aqueous, Phosphoric acid based carbonate scale remover.
Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Aqueous
Non-flammable
OCNS Gold Standard - without product warnings
Chlorine free
Inhibited
Less fumes than traditional descalers
Benefits
Phosphoric acid based formulation effectively cuts through carbonate scale
Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
Aqueous
Chlorine free
Inhibited
Non-flammable
Less fumes than traditional descalers
OCNS Gold Standard - with no product warnings
Where to Use
Designed for use in removing carbonate scale build up on mild steel
Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.
Additional Applications
Sobo Scale is an effective and versatile cleaner, suitable for use in:
Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
Rust removal
Removing scale from toilets
Cleaning oil from concrete
Removing concrete and plaster splashes on hard surfaces
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.
High flash point - not classified as flammable
Poses no threat to operators when stored
Internationally approved
Benefits
Suitable for application from both the air and from sea vessels
High flash point - not classified as flammable
Poses no threat to operators when stored - particularly important on vessels or oil rigs
Internationally approved (UK, France and Middle East)
Where to Use
SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.
How to Use
The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.
Aerial Application
SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE
=
APPLICATION RATE
x
SPEED
x
SWATHE WIDTH
(litres/min)
(litres/m2)
(m/min)
(m)
On Beaches, Rocky Shores, and Harbour Walls
Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
At all times advice should be sought from the incident commander.
An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.
High flash point - not classified as flammable
Poses no threat to operators when stored
Internationally approved
Benefits
Suitable for application from both the air and from sea vessels
High flash point - not classified as flammable
Poses no threat to operators when stored - particularly important on vessels or oil rigs
Internationally approved (UK, France and Middle East)
Where to Use
SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.
How to Use
The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.
Aerial Application
SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE
=
APPLICATION RATE
x
SPEED
x
SWATHE WIDTH
(litres/min)
(litres/m2)
(m/min)
(m)
On Beaches, Rocky Shores, and Harbour Walls
Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
At all times advice should be sought from the incident commander.
An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.
High flash point - not classified as flammable
Poses no threat to operators when stored
Internationally approved
Benefits
Suitable for application from both the air and from sea vessels
High flash point - not classified as flammable
Poses no threat to operators when stored - particularly important on vessels or oil rigs
Internationally approved (UK, France and Middle East)
Where to Use
SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.
How to Use
The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.
Aerial Application
SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE
=
APPLICATION RATE
x
SPEED
x
SWATHE WIDTH
(litres/min)
(litres/m2)
(m/min)
(m)
On Beaches, Rocky Shores, and Harbour Walls
Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
At all times advice should be sought from the incident commander.