Industrial Cleaning

Industrial Cleaning

A comprehensive and effective range of Industrial Cleaning products including Offshore Registered Rigwash, Oil Bioremediation, Aqueous and Solvent Degreasers and Component Cleaning solutions.
Aqualem-C - 1 x 25 Litre

Aqualem-C - 1 x 25 Litre

Aqualem-C-1x25L

Aqualem-C - 1 x 25 Litre

£54.99

Lemsolv Gold - 1 x 1000 Litre IBC

Lemsolv Gold - 1 x 1000 Litre IBC

Lemsolv-Gold-1x1000L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£2861.00

Quantity
Lemsolv Gold - 1 x 200 Litre

Lemsolv Gold - 1 x 200 Litre

Lemsolv-Gold-1x200L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£634.00

Quantity
Lemsolv Gold - 1 x 25 Litre

Lemsolv Gold - 1 x 25 Litre

Lemsolv-Gold-1x25L1

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£87.00

Quantity
Lemsolv Gold - 12 x 0.5 Trigger spray bottles

Lemsolv Gold - 12 x 0.5 Trigger spray bottles

Lemsolv-Gold-12-x-5

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£68.00

Quantity
Lemsolv Gold - 4 x 5 Litre

Lemsolv Gold - 4 x 5 Litre

Lemsolv-Gold-4x5L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£92.00

Quantity
MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 1000 Litre IBC

MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 1000 Litre IBC

MELT11-1x1000L

Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).

Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.

  • Aqueous
  • Non-flammable
  • Non-corrosive
  • Residue free
  • Biodegradable
  • OCNS Gold Standard - no product warnings

Benefits

  • Melts ice at temperatures down to -11°C (11°F).

  • Aqueous - a blend of organic biodegradable ingredients

  • Non-flammable - free from solvents

  • Non-corrosive - free from salts

  • Non-hazardous - requires no special PPE
  • No messy residue - ideal for use around areas which must be kept presentable in icy conditions

  • Biodegradable - no bioaccumulation potential

  • Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)

  • Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!

Where to Use

  • Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
  • Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
  • Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
  • When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.

How to Use

  • Use as supplied.
  • Remove excessive snow before application.
  • Spray across surface.
  • Suitable for use in backpack sprays systems.
  • For heavily affected areas, multiple applications may be required.

£793.90

Quantity
MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 200 Litre

MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 200 Litre

MELT11-1x200L

Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).

Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.

  • Aqueous
  • Non-flammable
  • Non-corrosive
  • Residue free
  • Biodegradable
  • OCNS Gold Standard - no product warnings

Benefits

  • Melts ice at temperatures down to -11°C (11°F).

  • Aqueous - a blend of organic biodegradable ingredients

  • Non-flammable - free from solvents

  • Non-corrosive - free from salts

  • Non-hazardous - requires no special PPE
  • No messy residue - ideal for use around areas which must be kept presentable in icy conditions

  • Biodegradable - no bioaccumulation potential

  • Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)

  • Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!

Where to Use

  • Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
  • Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
  • Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
  • When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.

How to Use

  • Use as supplied.
  • Remove excessive snow before application.
  • Spray across surface.
  • Suitable for use in backpack sprays systems.
  • For heavily affected areas, multiple applications may be required.

£221.95

Quantity
MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 25 Litre

MELT 11 Organic Ice Remover - OCNS Gold Standard 1 x 25 Litre

MELT11-1x25L

Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).

Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.

  • Aqueous
  • Non-flammable
  • Non-corrosive
  • Residue free
  • Biodegradable
  • OCNS Gold Standard - no product warnings

Benefits

  • Melts ice at temperatures down to -11°C (11°F).

  • Aqueous - a blend of organic biodegradable ingredients

  • Non-flammable - free from solvents

  • Non-corrosive - free from salts

  • Non-hazardous - requires no special PPE
  • No messy residue - ideal for use around areas which must be kept presentable in icy conditions

  • Biodegradable - no bioaccumulation potential

  • Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)

  • Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!

Where to Use

  • Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
  • Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
  • Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
  • When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.

How to Use

  • Use as supplied.
  • Remove excessive snow before application.
  • Spray across surface.
  • Suitable for use in backpack sprays systems.
  • For heavily affected areas, multiple applications may be required.

£40.00

Quantity
MELT 11 Organic Ice Remover - OCNS Gold Standard 12 x 500ml

MELT 11 Organic Ice Remover - OCNS Gold Standard 12 x 500ml

MELT11-12x-500ml

Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).

Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.

  • Aqueous
  • Non-flammable
  • Non-corrosive
  • Residue free
  • Biodegradable
  • OCNS Gold Standard - no product warnings

Benefits

  • Melts ice at temperatures down to -11°C (11°F).

  • Aqueous - a blend of organic biodegradable ingredients

  • Non-flammable - free from solvents

  • Non-corrosive - free from salts

  • Non-hazardous - requires no special PPE
  • No messy residue - ideal for use around areas which must be kept presentable in icy conditions

  • Biodegradable - no bioaccumulation potential

  • Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)

  • Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!

Where to Use

  • Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
  • Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
  • Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
  • When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.

How to Use

  • Use as supplied.
  • Remove excessive snow before application.
  • Spray across surface.
  • Suitable for use in backpack sprays systems.
  • For heavily affected areas, multiple applications may be required.

£51.83

Quantity
MELT 11 Organic Ice Remover - OCNS Gold Standard 4 x 5 Litre

MELT 11 Organic Ice Remover - OCNS Gold Standard 4 x 5 Litre

MELT11-4x-5L

Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).

Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.

  • Aqueous
  • Non-flammable
  • Non-corrosive
  • Residue free
  • Biodegradable
  • OCNS Gold Standard - no product warnings

Benefits

  • Melts ice at temperatures down to -11°C (11°F).

  • Aqueous - a blend of organic biodegradable ingredients

  • Non-flammable - free from solvents

  • Non-corrosive - free from salts

  • Non-hazardous - requires no special PPE
  • No messy residue - ideal for use around areas which must be kept presentable in icy conditions

  • Biodegradable - no bioaccumulation potential

  • Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)

  • Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!

Where to Use

  • Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
  • Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
  • Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
  • When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.

How to Use

  • Use as supplied.
  • Remove excessive snow before application.
  • Spray across surface.
  • Suitable for use in backpack sprays systems.
  • For heavily affected areas, multiple applications may be required.

£45.12

Quantity
Sobo GR 1 x 1000 Litre IBC Alkaline Aqueous Grease Remover - OCNS Gold Standard

Sobo GR 1 x 1000 Litre IBC Alkaline Aqueous Grease Remover - OCNS Gold Standard

SOBO-GR-1x1000L

An effective, aqueous, alkaline degreaser, designed for use Offshore.

Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.

  • Aqueous
  • Alkaline
  • Non-flammable
  • OCNS Gold Standard - with no product warnings

Benefits

  • Alkaline formulation for effective degreasing properties
  • Biodegradable surfactants help lift and remove oil and grease contamination
  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - with no product warnings 

Where to Use 

  • An effective, aqueous, alkaline degreaser, designed for use Offshore
  • Ideal for degreasing pipework
  • Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)

 

How to Use

  • For heavy duty degreasing:

    • Use as supplied
  • For general purpose cleaning:

    • Use at a dilution of 1 part Sobo GR to 19 parts water
    • The use of warm water is recommended, ideally at approximately 60°C
    • Dilutions with fresh water can be stored for use later
    • Dilutions with sea water should be used immediately

Note:

  • Can be used with care on aluminium, zinc and magnesium alloys.
  • Always test on a non-safety critical area first to ensure compatibility.
  • Rinse thoroughly with clean water after use.

£1172.00

Quantity
Sobo GR 1 x 200 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

Sobo GR 1 x 200 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

SOBO-GR-1x200L

An effective, aqueous, alkaline degreaser, designed for use Offshore.

Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.

  • Aqueous
  • Alkaline
  • Non-flammable
  • OCNS Gold Standard - with no product warnings

Benefits

  • Alkaline formulation for effective degreasing properties
  • Biodegradable surfactants help lift and remove oil and grease contamination
  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - with no product warnings 

Where to Use 

  • An effective, aqueous, alkaline degreaser, designed for use Offshore
  • Ideal for degreasing pipework
  • Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)

 

How to Use

  • For heavy duty degreasing:

    • Use as supplied
  • For general purpose cleaning:

    • Use at a dilution of 1 part Sobo GR to 19 parts water
    • The use of warm water is recommended, ideally at approximately 60°C
    • Dilutions with fresh water can be stored for use later
    • Dilutions with sea water should be used immediately

Note:

  • Can be used with care on aluminium, zinc and magnesium alloys.
  • Always test on a non-safety critical area first to ensure compatibility.
  • Rinse thoroughly with clean water after use.

£301.22

Quantity
Sobo GR 1 x 25 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

Sobo GR 1 x 25 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

SOBO-GR-1x25L

An effective, aqueous, alkaline degreaser, designed for use Offshore.

Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.

  • Aqueous
  • Alkaline
  • Non-flammable
  • OCNS Gold Standard - with no product warnings

Benefits

  • Alkaline formulation for effective degreasing properties
  • Biodegradable surfactants help lift and remove oil and grease contamination
  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - with no product warnings 

Where to Use 

  • An effective, aqueous, alkaline degreaser, designed for use Offshore
  • Ideal for degreasing pipework
  • Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)

 

How to Use

  • For heavy duty degreasing:

    • Use as supplied
  • For general purpose cleaning:

    • Use at a dilution of 1 part Sobo GR to 19 parts water
    • The use of warm water is recommended, ideally at approximately 60°C
    • Dilutions with fresh water can be stored for use later
    • Dilutions with sea water should be used immediately

Note:

  • Can be used with care on aluminium, zinc and magnesium alloys.
  • Always test on a non-safety critical area first to ensure compatibility.
  • Rinse thoroughly with clean water after use.

£54.17

Quantity
Sobo GR 4 x 5 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

Sobo GR 4 x 5 Litre Alkaline Aqueous Grease Remover - OCNS Gold Standard

SOBO-GR-4x5L

An effective, aqueous, alkaline degreaser, designed for use Offshore.

Sobo GR's alkaline formulation provides effective degreasing. Also contains biodegradable surfactants to help lift and remove oil and grease contamination.

  • Aqueous
  • Alkaline
  • Non-flammable
  • OCNS Gold Standard - with no product warnings

Benefits

  • Alkaline formulation for effective degreasing properties
  • Biodegradable surfactants help lift and remove oil and grease contamination
  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - with no product warnings 

Where to Use 

  • An effective, aqueous, alkaline degreaser, designed for use Offshore
  • Ideal for degreasing pipework
  • Also suitable for passivating mild steel after acid pickling and scale removing operations (ideal for use in conjunction with Sobo Scale)

 

How to Use

  • For heavy duty degreasing:

    • Use as supplied
  • For general purpose cleaning:

    • Use at a dilution of 1 part Sobo GR to 19 parts water
    • The use of warm water is recommended, ideally at approximately 60°C
    • Dilutions with fresh water can be stored for use later
    • Dilutions with sea water should be used immediately

Note:

  • Can be used with care on aluminium, zinc and magnesium alloys.
  • Always test on a non-safety critical area first to ensure compatibility.
  • Rinse thoroughly with clean water after use.

£58.33

Quantity
Sobo Scale 1 x 1000 Litre IBC Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

Sobo Scale 1 x 1000 Litre IBC Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

SOBO-SCALE-1x1000L

An effective, aqueous, Phosphoric acid based carbonate scale remover. 

Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - without product warnings
  • Chlorine free
  • Inhibited
  • Less fumes than traditional descalers

Benefits

  • Phosphoric acid based formulation effectively cuts through carbonate scale
  • Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
  • Aqueous
  • Chlorine free
  • Inhibited
  • Non-flammable
  • Less fumes than traditional descalers
  • OCNS Gold Standard - with no product warnings 

Where to Use

  • Designed for use in removing carbonate scale build up on mild steel
  • Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

 

Additional Applications

Sobo Scale is an effective and versatile cleaner, suitable for use in: 

  • Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
  • Rust removal
  • Removing scale from toilets
  • Cleaning oil from concrete
  • Removing concrete and plaster splashes on hard surfaces

£1579.22

Quantity
Sobo Scale 1 x 200 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

Sobo Scale 1 x 200 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

SOBO-SCALE-1x200L

An effective, aqueous, Phosphoric acid based carbonate scale remover. 

Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - without product warnings
  • Chlorine free
  • Inhibited
  • Less fumes than traditional descalers

Benefits

  • Phosphoric acid based formulation effectively cuts through carbonate scale
  • Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
  • Aqueous
  • Chlorine free
  • Inhibited
  • Non-flammable
  • Less fumes than traditional descalers
  • OCNS Gold Standard - with no product warnings 

Where to Use

  • Designed for use in removing carbonate scale build up on mild steel
  • Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

 

Additional Applications

Sobo Scale is an effective and versatile cleaner, suitable for use in: 

  • Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
  • Rust removal
  • Removing scale from toilets
  • Cleaning oil from concrete
  • Removing concrete and plaster splashes on hard surfaces

£385.37

Quantity
Sobo Scale 1 x 25 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

Sobo Scale 1 x 25 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

SOBO-SCALE-1x25L

An effective, aqueous, Phosphoric acid based carbonate scale remover. 

Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - without product warnings
  • Chlorine free
  • Inhibited
  • Less fumes than traditional descalers

Benefits

  • Phosphoric acid based formulation effectively cuts through carbonate scale
  • Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
  • Aqueous
  • Chlorine free
  • Inhibited
  • Non-flammable
  • Less fumes than traditional descalers
  • OCNS Gold Standard - with no product warnings 

Where to Use

  • Designed for use in removing carbonate scale build up on mild steel
  • Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

 

Additional Applications

Sobo Scale is an effective and versatile cleaner, suitable for use in: 

  • Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
  • Rust removal
  • Removing scale from toilets
  • Cleaning oil from concrete
  • Removing concrete and plaster splashes on hard surfaces

£69.00

Quantity
Sobo Scale 4 x 5 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

Sobo Scale 4 x 5 Litre Sobo Scale Carbonate Scale Remover - OCNS Gold Standard

SOBO-SCALE-4x5L

An effective, aqueous, Phosphoric acid based carbonate scale remover. 

Sobo Scale will leave a deposit of Iron Phosphate on mild steel which can be painted or oiled to give even greater corrosion protection. Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

  • Aqueous
  • Non-flammable
  • OCNS Gold Standard - without product warnings
  • Chlorine free
  • Inhibited
  • Less fumes than traditional descalers

Benefits

  • Phosphoric acid based formulation effectively cuts through carbonate scale
  • Contains biodegradable surfactants to lift and remove oil and grease contamination and speed up scale removal
  • Aqueous
  • Chlorine free
  • Inhibited
  • Non-flammable
  • Less fumes than traditional descalers
  • OCNS Gold Standard - with no product warnings 

Where to Use

  • Designed for use in removing carbonate scale build up on mild steel
  • Also suitable for removing carbonate scale from Stainless Steel alloys and Copper alloys.

 

Additional Applications

Sobo Scale is an effective and versatile cleaner, suitable for use in: 

  • Brightening stainless steel and copper alloys - ideal for cleaning alloy wheels
  • Rust removal
  • Removing scale from toilets
  • Cleaning oil from concrete
  • Removing concrete and plaster splashes on hard surfaces

£60.75

Quantity
SuperDispersant25 - 1 x 1000 Litre IBC

SuperDispersant25 - 1 x 1000 Litre IBC

SuperDispersant25-1000L

Type 2/3 Marine Oil Dispersant

An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.

SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.

  • High flash point - not classified as flammable
  • Poses no threat to operators when stored
  • Internationally approved

Benefits

  • Suitable for application from both the air and from sea vessels
  • High flash point - not classified as flammable
  • Poses no threat to operators when stored - particularly important on vessels or oil rigs
  • Internationally approved (UK, France and Middle East)

Where to Use

  • SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
  • Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.

How to Use

  • The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
  • In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
  • As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
  • As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
  • In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
  • Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
  • If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.

 

Aerial Application

  • SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
  • It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
  • The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
  • The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE = APPLICATION RATE x SPEED x SWATHE WIDTH
(litres/min)   (litres/m2)   (m/min)   (m)

On Beaches, Rocky Shores, and Harbour Walls  

  • Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
  • It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
  • At all times advice should be sought from the incident commander.

£7317.68

Quantity
SuperDispersant25 - 1 x 200 Litre

SuperDispersant25 - 1 x 200 Litre

SuperDispersant25-200L

Type 2/3 Marine Oil Dispersant

An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.

SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.

  • High flash point - not classified as flammable
  • Poses no threat to operators when stored
  • Internationally approved

Benefits

  • Suitable for application from both the air and from sea vessels
  • High flash point - not classified as flammable
  • Poses no threat to operators when stored - particularly important on vessels or oil rigs
  • Internationally approved (UK, France and Middle East)

Where to Use

  • SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
  • Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.

How to Use

  • The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
  • In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
  • As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
  • As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
  • In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
  • Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
  • If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.

 

Aerial Application

  • SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
  • It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
  • The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
  • The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE = APPLICATION RATE x SPEED x SWATHE WIDTH
(litres/min)   (litres/m2)   (m/min)   (m)

On Beaches, Rocky Shores, and Harbour Walls  

  • Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
  • It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
  • At all times advice should be sought from the incident commander.

£1511.58

Quantity
SuperDispersant25 - 1 x 25 Litre

SuperDispersant25 - 1 x 25 Litre

SuperDispersant25-25L

Type 2/3 Marine Oil Dispersant

An internationally approved Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.

SuperDispersant 25 has approvals from UK FEPA (Food and Environment Protection), CEDRE in France and ROPME in the Middle East.

  • High flash point - not classified as flammable
  • Poses no threat to operators when stored
  • Internationally approved

Benefits

  • Suitable for application from both the air and from sea vessels
  • High flash point - not classified as flammable
  • Poses no threat to operators when stored - particularly important on vessels or oil rigs
  • Internationally approved (UK, France and Middle East)

Where to Use

  • SuperDispersant 25 is a Type 2/3 marine oil dispersant, suitable for application from both the air and from sea vessels.
  • Suitable for use on oil spills on both water and coastal areas such as beaches, shorelines and harbour walls.

How to Use

  • The recommended rate of application of SuperDispersant 25 is 1 part dispersant to 20-30 parts of oil. This rate depends on many factors including type of oil, viscosity, degree of weathering, ambient temperature and prevailing weather conditions.
  • In general, the oil should be treated as quickly as possible, as weathering increases the viscosity of the oil, and this in turn necessitates a substantial increase in the dispersant required.
  • As a Type 2 dispersant (water dilution mode), SuperDispersant 25 is used premixed at a ratio of 1 part dispersant to 10 parts sea water and sprayed onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.
  • As a Type 3 dispersant (undiluted mode), SuperDispersant 25 is used in its neat form, utilising appropriate spraying equipment from aircraft or vessels onto the slick.
  • In all circumstances, the Type 3 mode is the preferred method as this gives far greater efficiency in the dispersal of the oil slick.
  • Ideally SuperDispersant 25 is sprayed undiluted from bow mounted spray booms in order to take advantage of the "roll-over" effect of the vessel's bow wave.
  • If SuperDispersant 25 is used in the diluted mode, additional agitation is required by the use of surface breaker boards or fire hoses.

 

Aerial Application

  • SuperDispersant 25 can be applied by a wide variety of rotary and fixed wing aircraft, particularly dedicated spraying aircraft if these are available.
  • It must be emphasised that due to aircraft speed, atomisation of the dispersant must be reduced by using a spray nozzle system that will give a large droplet size (700 - 1200 microns).
  • The rate of application for SuperDispersant 25 to the slick will vary according to a number of parameters. It can generally be estimated that if a slick is dark brown/black in colour, it will have a thickness of 100 - 200 microns. This would represent 1-2 tonnes of oil per hectare and would require 50 - 100 litres per hectare of dispersant to treat the slick.
  • The discharge rate for SuperDispersant 25 can be obtained from the general relationship:
DISCHARGE RATE = APPLICATION RATE x SPEED x SWATHE WIDTH
(litres/min)   (litres/m2)   (m/min)   (m)

On Beaches, Rocky Shores, and Harbour Walls  

  • Spray the undiluted SuperDispersant 25 on to the contaminated areas using portable back sprayers or dedicated beach cleaners if these are available.
  • It is preferable to spray in front of a rising tide, in order to effect rapid natural dispersion.
  • At all times advice should be sought from the incident commander.

£204.27

Quantity
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy.
More Information