The SERPRO Water Magnet is a low cost preventative measure, and a solution, to the all to common problem of water contaminating fuel or oil tanks.
Water from condensation, or rain water ingress, can rot a metal tank and no matter wether you are using a plastic or metal storage tank any water in a fuel line will damage the equipment using it. The question is, what to do about it? Siphoning cannot get at all the water, and wastes some of the stored product as well. Draining down is expensive and time consuming.
You need to have the water soaked up and removed. We have the solution - we call it the Water Magnet.
Simply attach a cord to the filter cage, drop it into the tank via a manhole, vent or other convenient opening, secure the cord, and walk away. Once it has dropped to the bottom it will immediately start to absorb any water into the sack in the center, once exhausted the sack will have expanded to fill the cage.
SIMPLE - EFFECTIVE - INEXPENSIVE
Water Magnet Size 4cm
Size: 4.4cm dia x 30cm |
£17.61
Water Magnet Size-2
Size: 5.6cm dia x 30cm The Water Magnet is the economic choice to the regularly occurring nightmare of water polluting fuel holding tanks and storage containers. Condensation on the inside fuel tanks, which if not removed, not only corrodes the interior of the container, but can easily also make motor starting significantly more difficult. With oil-fired central heating tanks often the issue may well be with high condensation inside of the plastic based container. On watercraft the water seepage into diesel tanks may very well lead to complications, particularly if the water traps come to be overloaded. The Soaker absorbs the water from 'under' the fuel and can be reused until eventually saturated. Simply drop the Water Magnet right into your tank and use the line attached to recover and examine. The outer container/net keeps the inner sorbent compound from swelling larger than the filler opening.
|
£19.37
10 x 30cm Water Magnet Size-3
Size: 10cm dia x 30cm Our Water Magnet is the cost effective best solution to the well-known crisis because of water contaminating fuel holding tanks and storage containers. Moisture build-up or condensation on the inside fuel tanks, which if not eliminated, not only corrodes the inside of the container, but may also make powerplant starting a great deal more difficult. With oil-fired central heating tanks typically the issue in many cases can be with excessive moisture build-up or condensation inside of the plastic based container. On watercraft the water seepage straight into oil and fuel containers can potentially lead to complications, particularly if the water traps become beyond capacity. The Water Magnet absorbs the water from 'under' the fuel and can be used until saturated. Simply drop the Water Magnet into your fuel tank and use the line attached to retrieve and examine. The outer carrier/net prevents the internal sorbent compound from swelling larger than the filler opening.
|