The Simple and Economical way to deal with lightly Oil Contaminated bund and drain water.
Economic and environmental benefits
-- Removes oil, fuel and sediment from contaminated water to an almost non-detectable level. -- Reduces operating costs by elimination the need to remove contaminated water by tanker as special waste. -- Reduces the risk of prosecution by reducing the temptation to release contaminated water into the environment. -- Highly useful to companies registered for BS EN ISO 14001 certification.
Easy to use.
-- Only tool needed is a screwdriver. -- Simply connect the Filter-Sock to a hand pump and secure with the supplied hose clip. -- Pump the contents of the bund or drain through the Filter-Sock. -- Regular check the discharge for cleanliness. -- Dispose of the used Filter Sock as oil contaminated waste.
The Filter-Sock is not suitable for high pressure pumps or for emulsified liquids. The user should ensure that the Fitler-Sock is monitored to ensure only clean water is discharged and that all local and national regulations regarding discharge to the ground, waterways or other catchments are complied with.
Multi-Layered Filtration system removes oil, fuel and sediment
IDEAL FOR Bunds - Manholes Drains - Ditches Retention Ponds
Filter-sock has been designed to filter sediments and with its purpose made ‘piled’ internal filter and oils and fuels from its “Hydrophobic Lay-Flat’ tube. It features a multi-layered filtration system contained within a 400cm long and 25cm wide flexible sock. Designed to filter sediments down to very fine particle sizes, independent performance testing shows that the filter removes 99% of sediment and oils & fuels. It is designed to optimize filtration without reducing flow rates.
The Filter-sock comes with full instructions and is very easy to operate. It can be moved around the site as needed. It rolls out and can be used several times until the sock is full. It is then rolled up, sealed in a clean, leak-proof package and secured inside a plastic bag. Filter-sock is supplied with an adjustable hose clip for easy connecting to hoses and pipes ranging from 25mm to 50mm.
The Filter-Sock is not suitable for high pressure pumps or for emulsified liquids. The user should ensure that the Fitler-Sock is monitored to ensure only clean water is discharged and that all local and national regulations regarding discharge to the ground, waterways or other catchments are complied with.