ENPAC

Universal Poly-Drum Funnel

FNL17697

Size Exterior: 66cm Dia x 13cm H
Size Interior: 56cm Dia x 10cm H

Fits both 205 Litre and 110 Litre drums and other flat topped containers. Exclusive features include patented scalloped design, high side wall and bung fitting holders.

Easy to fit, just set and forget.

£72.12

Quantity

Overpack Container for 205Litre Drums

1237-YE

Overpack container for 205Litre drums

£430.29

Single Poly Racker Drum Bunded Dispensing Unit

6006-YE

Size: 135 x 79 x 82cm
Max Load: 725Kg
Sump Capacity: 250 Litres

Economical, space-saving solution to storing and dispensing from 205Ltr drums. The system consists of separate single Poly-Racker, single Poly-Stacker and Poly Shelf. The Poly Stacker allows for stacking of a second 205Ltr drum. The system holds 725Kg and the Poly-Racker features 250Ltre sump capacity!

If you are looking for low-profile storage and containment with the ability to dispense, all in one convenient unit, then look no further than the Single Poly-Racker system. This Racker component features a fully enclosed, compliant sump, allowing for transport after a spill has occured. Nothing is more convenient for horizontal dispensing and containment than the Racker-Stacker systems.

£1224.75

Single Drum Poly Stacker

6007-YE

Size: 103 x 79 x 50cm
Max Load: 363Kg (as a free standing unit)

The Single Drum Stacker allows for stacking of a second 205Ltr drum on top of the Single Poly Racker Drum Bunded Dispensing Unit


If you are looking for low-profile storage and containment with the ability to dispense, all in one convenient unit, then look no further than the Single Poly-Racker system.

This Stacker component was designed to provide additional storage on top of the Single Stacker, but can also be used as a standalone unit on top of a containment sump. Nothing is more convenient for horizontal dispensing and containment than the Racker-Stacker systems.

£763.40

Poly Shelf for Single Drum Stacker Unit

6003-YE

Size: 43 x 56 x 44cm
Max Load: 27Kg

Save money and prevent spills! Increase safety and productivity when you add the Poly-Shelf to your Poly-Rack Drum Dispensing System. It easily attaches to a single Drum Poly-Stacker Unit and allows simultaneous dispensing from all drums. A hole in the bottom of the Poly-Shelf drains into the dispensing well in the Poly-Racker Base unit.

This polyethylene shelf is extremely tough and chemically resistant, making it the perfect accessory for any Poly-Rack system. It easily hooks in place and holds smaller containers for liquid transfer from 55 gallon drums.

Fits: 

  • 6002-YE
  • 6007-YE
  • 6004-YE

£210.25

Quantity

Universal Well Liner

6005-BK

The Universal Well Liner provides extra spill protection and makes clean-up fast and easy. Widely used with both racking systems. To reclaim spilled material, just lift up the liner.

Dimensions:
12.75"L x 15.5"W x 1.5"H
32 x 39 x 6cm

Weight: 1.25lb / 600grm

Capacity: 0.4 us gal / 1.5 Litres

Fits ENPAC:

5300-YE
5300-YE-A
6006-YE
6000-YE

Poly Labtray

5248-YE

Dimensions:
Base: 65 x 56 x 8cm
Grate: 53 x 44cm
Sump Cap: 9.4 Litres
Handling Cap: 18 kg
Regs: EPA. SPCC, NPDES
 

The precise work that occurs in a lab requires tailored containment found in the ENPAC Poly-Labtray. Its plastic construction is very chemically resistant, while the design catches overflows of liquid and powder chemicals during standard lab operations. The large surface can hold up to four 4 litren bottles, while the sump holds a generous 9.4Litres.

  • Won't rust or corrode
  • Removable grate for easy cleaning
  • Low-profile, unobtrusive design
  • Prevents contamination of other lab equipment

2 Drum Workstation

5117-YE

Size: 135 x 72 x 14cm
Weight: 17.3 kg
Sump Cap: 83 Litres
Handling Cap: 1089 kg
Regs: EPA, SPCC and NPDES

Workstations are essentially a low-profile spill pallet that allow you to customize a contained workspace for any situation. All models feature removable grates for easy access to the sump, and the plastic design will not rust or corrode. Save space and stay compliant with these top sellers.

  • Forkliftable when empty.
  • Tough, one-piece polyethylene construction that will not rust or corrode.
  • Low-profile Workstations™ actually become part of your factory floor, optimizing space for increased safety and efficiency.
  • Low profile drip and leak protection.
  • Large sump capacity catches incidental spills.
  • Removable heavy-duty structural foam grates for easy cleaning.
  • Rolled-edge design helps resist cracking and warpage. • Multi-Purpose Work Ramp™ hooks onto any Workstation™ for easy loading.
  • Link-Locks™ create a solid workspace by attaching units
  • Tarps available for added protection.

There’s no need to worry about incidental spills on your factory floor. Workstations™ are easy to load with a low profile design and optional ramp. Each Workstation™ is designed for stand-alone use or can connect with other Workstations™, using link-locks™, for a customized work area.

4 Drum Workstation

5116-YE

Size: 133 x 135 x 15cm
Weight: 32 kg
Sump Cap: 151 Litres
Handling Cap: 2722 kg
Regs: EPA, SPCC and NPDES

Workstations are essentially a low-profile spill pallet that allow you to customize a contained workspace for any situation. All models feature removable grates for easy access to the sump, and the plastic design will not rust or corrode. Save space and stay compliant with these top sellers.

  • Forkliftable when empty.
  • Tough, one-piece polyethylene construction that will not rust or corrode.
  • Low-profile Workstations™ actually become part of your factory floor, optimizing space for increased safety and efficiency.
  • Low profile drip and leak protection.
  • Large sump capacity catches incidental spills.
  • Removable heavy-duty structural foam grates for easy cleaning.
  • Rolled-edge design helps resist cracking and warpage. • Multi-Purpose Work Ramp™ hooks onto any Workstation™ for easy loading.
  • Link-Locks™ create a solid workspace by attaching units
  • Tarps available for added protection.

There’s no need to worry about incidental spills on your factory floor. Workstations™ are easy to load with a low profile design and optional ramp. Each Workstation™ is designed for stand-alone use or can connect with other Workstations™, using link-locks™, for a customized work area.

Poly-Overpack 20 - 75Litre Salvage Container

1220-YE

Overpack container for up to 75Litre

Sump Capacity: 75Litres
Max Load: 75 kg
Dimensions
Top Dia: Ext - 57cm Int:55cm
Bottom Dia: Ext - 48cm Int - 43cm
Height Ext - 48cm Int - 44cm
Weight: 4.5 kg
Regs: UN 1H2/X75/S, UN 1H2/Y100/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES

The Enpac Poly-Overpack® 20 meets Group 1 packaging standards and salvage drum regulations. Unlike other overpacks, the Poly-Overpack 20 safely contains a wide range of hazardous materials including: acids, corrosives and damaged parts.

Tight, secure and leak-free container - closing the lid is simple: place any long object (like a wooden two-by-four) in the handy lid slots, and turn to screw the lid down tightly. The double walled  lid has a closed cell gasket which ensures full closure

£185.12

£178.85

3% Off
Quantity
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy.
More Information