Now available in a smaller size for small stains and home-owners.
CLEANING OF OIL AND FUEL RESIDUES HAS NEVER BEEN SO EASY
Completely removes oil and fuel residue
Contains all the products and tools for the whole job
Simple step-by-step application guide
No Solvents or caustics - totally environmentally friendly
Nothing to escape to the drain - minimal environmental impact
500ml will clean approx. half a square metre of recent oil spill/staining.
A new approach to the removal of oil stains − a biological oil stain remover that rapidly removes and digests oil stains from hard surface and porous blockwork, including floors, road surfaces, forecourts, driveways and equipment.
Designed to remove oil and fuels from concrete and blockwork.
Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.
These cutting-edge cleaners form the basis of our highly acclaimed Concrete Oil Stain Removal Kits.
Should be used neat - undiluted.
German UBA − Environmentally acceptable chemical
Separator Friendly − Meets EN 858
Dried residue may require more than one application
Engine oil deposits may leave carbon deposits produced during combustion. These will gradually oxidise and diminish over time.
Removal of long term or hard/dried stain cannot be guaranteed
CLEANING OF OIL AND FUEL RESIDUES HAS NEVER BEEN SO EASY
Completely removes oil and fuel residue
Contains all the products and tools for the whole job
Simple step-by-step application guide
No Solvents or caustics - totally environmentally friendly
Nothing to escape to the drain - minimal environmental impact
Each kit cleans 2.5m2 - expansion packs available for larger residues
A new approach to the removal of oil stains − a biological oil stain remover that rapidly removes and digests oil stains from hard surface and porous blockwork, including floors, road surfaces, forecourts, driveways and equipment.
Designed to remove oil and fuels from concrete and blockwork.
Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.
These cutting-edge cleaners form the basis of our highly acclaimed Concrete Oil Stain Removal Kits.
Should be used neat - undiluted.
German UBA − Environmentally acceptable chemical Separator Friendly − Meets EN 858
Dried residue may require more than one application
Engine oil deposits may leave carbon deposits produced during combustion. These will gradually oxidise and diminish over time.
Removal of long term or hard/dried stain cannot be guaranteed
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.
A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s. Approved for use offshore under HOCNS.
KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered
APPROVALS
• HOCNS Gold - With low hazard quotient
APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components v prior to use of aqueous rigwashes. Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components. Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.