Degreasers

Degreasers
We supply a range of highly effective degreasers for use on all oil based soiling.

Spillpod Degreaser 2 x 1Litre per pack

U0006

Spillpod Degreaser 2 x 1Litre per pack

£22.42

£17.71

21% Off
Quantity

Multi-Use Biodegradable Aqueous Degreaser 5 Litre

BIO17685

Multi-Use Biodegradable Aqueous Degreaser 5 Litre

£27.87

Quantity

Concrete and Hard Surface Oil Stain Remover 500ml

OT8-500ml

Size: 500ml

Now available in a smaller size for small stains and home-owners.

CLEANING OF OIL AND FUEL RESIDUES HAS NEVER BEEN SO EASY

  • Completely removes oil and fuel residue
  • Contains all the products and tools for the whole job
  • Simple step-by-step application guide
  • No Solvents or caustics - totally environmentally friendly
  • Nothing to escape to the drain - minimal environmental impact
  • 500ml will clean approx. half a square metre of recent oil spill/staining.

A new approach to the removal of oil stains − a biological oil stain remover that rapidly removes and digests oil stains from hard surface and porous blockwork, including floors, road surfaces, forecourts, driveways and equipment.

Designed to remove oil and fuels from concrete and blockwork.

Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.

These cutting-edge cleaners form the basis of our highly acclaimed Concrete Oil Stain Removal Kits.

Should be used neat - undiluted.

German UBA − Environmentally acceptable chemical
Separator Friendly − Meets EN 858

 

  • Dried residue may require more than one application
  • Engine oil deposits may leave carbon deposits produced during combustion. These will gradually oxidise and diminish over time.
  • Removal of long term or hard/dried stain cannot be guaranteed

 

INSTRUCTIONS FOR USE CLICK HERE

£10.99

£7.99

27% Off
Quantity

Multi-Use Biodegradable Aqueous Degreaser 205 Litre

BIO18142

Multi-Use Biodegradable Aqueous Degreaser 205 Litre

£449.39

Quantity

OT8 Concrete and Hard Surface Oil Stain Remover 5 Litres

OT8-5L

Size: 5 Litres

 

CLEANING OF OIL AND FUEL RESIDUES HAS NEVER BEEN SO EASY

  • Completely removes oil and fuel residue
  • Contains all the products and tools for the whole job
  • Simple step-by-step application guide
  • No Solvents or caustics - totally environmentally friendly
  • Nothing to escape to the drain - minimal environmental impact
  • Each kit cleans 2.5m2 - expansion packs available for larger residues

A new approach to the removal of oil stains − a biological oil stain remover that rapidly removes and digests oil stains from hard surface and porous blockwork, including floors, road surfaces, forecourts, driveways and equipment.

Designed to remove oil and fuels from concrete and blockwork.

Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.

These cutting-edge cleaners form the basis of our highly acclaimed Concrete Oil Stain Removal Kits.

Should be used neat - undiluted.

German UBA − Environmentally acceptable chemical
Separator Friendly − Meets EN 858

 

  • Dried residue may require more than one application
  • Engine oil deposits may leave carbon deposits produced during combustion. These will gradually oxidise and diminish over time.
  • Removal of long term or hard/dried stain cannot be guaranteed

 

INSTRUCTIONS FOR USE CLICK HERE

£55.67

Quantity

Lemsolv Gold - 12 x 0.5 Trigger spray bottles

Lemsolv-Gold-12-x-5

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

Lemsolv Gold - 4 x 5 Litre

Lemsolv-Gold-4x5L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

£190.89

Lemsolv Gold - 1 x 25 Litre

Lemsolv-Gold-1x25L1

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

Lemsolv Gold - 1 x 200 Litre

Lemsolv-Gold-1x200L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

Lemsolv Gold - 1 x 1000 Litre IBC

Lemsolv-Gold-1x1000L

A low hazard profile, precision cleaner that can be used safely on engineering components, drill floors, electrical motors and PCB’s.  Approved for use offshore under HOCNS.

KEY PROPERTIES
A rapid drying solvent which leaves no residue. Suitable for immersion, spray, wipe ultrasonic or bench top cleaning.
Suitable for pre-cleaning treatment of heavily soiled items subject to aqueous cleaning.
Lemsolv Gold has a flash point above 70°C, has a low hazard profile and low environmental impact.
Contains no emulsifiers, making it “separator friendly” for aqueous effluent
• Separator Friendly
• Rapid Drying
• Component Safe
• HOCNS registered

APPROVALS
• HOCNS Gold - With low hazard quotient

APPLICATION
• Use a low volume contact pre-treatment for heavily soiled drill floor components  v prior to use of aqueous rigwashes.  Dispose via closed drain system in this a a a a a product.
• Can also be used to soften stubborn grease deposits prior to aqueous cleaning.
• Excellent for cleaning precision metal or plastic components and electrical v v v a d components.  Do not use on live equipment.
• Can be used as supplied in dip tanks, spray machines and ultrasonic baths.
• Available in trigger sprays for bench top use.

Aqualem-C - 1 x 25 Litre

Aqualem-C-1x25L

Aqualem-C - 1 x 25 Litre

£186.56

Quantity
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy.
More Information