Tray Size: 79 x 40 x 4cm Capacity: 11Litres per tray Height Between Trays: 51cm
A very useful storage tray which can easily accommodate 3 pairs of full size boots or shoes. A perfect solution when you don't want mud and muck travelling through your home or work place.
It features a series of raised ridges on the base of the tray which support the soles of the footwear and allow good air circulation to aid airing and drying.
There is more than sufficent height clearance between the two tiers to accomodate Wellington Boots on the bottom. The uprights are rust proof aluminium. Simple assembly is required and all fixings are supplied.
Ideal for farms, site huts, wet rooms - anywhere that shoes and boots have to be removed before entering a building.
2-Ply paper roll - 20cm x 65metres Perforated Handy size Pack of 12
When it comes to paper kitchen rolls does it really matter that it isn't that pretty! Ours doesn't have pretty flowers printed on it. Ours doesn't come with fancy packaging. Ours doesn't have dimples or quilts.
What is more important is how much is on the roll. Our rolls have more than 3 times the length of the longest one we could find on the net.
When we talked to people about using a kitchen roll we couldn't find anyone that wiped up some liquid then wrung it out and used it again. Everyone we spoke to just binned it. Most of the time people just tear off a few sheets, use and then throw it away. Never seen anyone that carefully tore just 1 sheet off, or took the time to think about how many sheets they would need.
Our rolls are sturdy 2 ply white paper that gets the job done. Our rolls are 65 Metres long, that's 3 times longer than any we could find on the net including;
Plenty - 14 metres
Fiesta - 12 metres
Lotus - 13 metres
Cotton Soft - 18 metres
Regina - 20 metres
The cheapest roll we could find on the net was an economy own brand at 57p, from a major supermarket and we'll assume that it is 15Metres long - it probably isn't but we'll say that it is.
That makes our rolls the equivalant of 36p per roll (inc VAT) compared by metreage.
The Regina came in at a whopping £1.16 per roll which makes our rolls the equivalent of 48p per roll - less than half the price.
So if you are not worried about prints, dimples, quilts or fancy packaging ours are the cheapest.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
Melt 11 is designed for melting ice from pipework and general metal architecture such as walkways on oilrigs at temperatures as low as -11°C (11°F).
Melt 11’s organic formulation is also ideal for general path clearing and around grassed areas.
Aqueous
Non-flammable
Non-corrosive
Residue free
Biodegradable
OCNS Gold Standard - no product warnings
Benefits
Melts ice at temperatures down to -11°C (11°F).
Aqueous - a blend of organic biodegradable ingredients
Non-flammable - free from solvents
Non-corrosive - free from salts
Non-hazardous - requires no special PPE
No messy residue - ideal for use around areas which must be kept presentable in icy conditions
Biodegradable - no bioaccumulation potential
Uses “Plonor Approved” material - suitable for use in offshore installations (OCNS Gold Standard)
Suitable for use around grassed areas - Melt 11’s organic formulation will even act as a mild fertiliser in the environment after use!
Where to Use
Melt 11 is non-flammable and non-corrosive, ideal for melting ice from pipework and general metal architecture such as walkways on oilrigs.
Melt 11’s biodegradable organic formulation is also ideal for general path clearing and around grassed areas such as playing fields − will not burn grass or leave stunted growth, and Melt 11’s organic formulation will act as a mild fertiliser in the environment after use.
Leaves no dirty residue − ideal for use around areas which must be kept presentable in icy conditions, such as access to reception areas.
When used in concrete yards with interceptors, the run off will work in harmony alongside Oil Technics’s Bio Tubes biological action.
How to Use
Use as supplied.
Remove excessive snow before application.
Spray across surface.
Suitable for use in backpack sprays systems.
For heavily affected areas, multiple applications may be required.
The tarmac and asphalt surface cleaner has been designed to remove oil and fuels from floors, road surfaces, forecourts, driveways and equipment.
Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.
These cutting-edge cleaners form the basis of our highly acclaimed Tarmac and Asphalt Oil Stain Removal Kits.
Should be used neat - undiluted.
German UBA − Environmentally acceptable chemical Separator Friendly − Meets EN 858
The tarmac and asphalt surface cleaner has been designed to remove oil and fuels from floors, road surfaces, forecourts, driveways and equipment.
Containing a blend of biological enzymes and bacteria to digest oil stains to completion, penetrates and lifts oil stains from even the most porous surface.
These cutting-edge cleaners form the basis of our highly acclaimed Tarmac and Asphalt Oil Stain Removal Kits.
Should be used neat - undiluted.
German UBA − Environmentally acceptable chemical Separator Friendly − Meets EN 858